Rated Power is measured after a 2-hour test using a pink noise signal with a 6dB crest factor, with the loudspeaker in free air, and power calculated based on rated Zmin.

The Power on Continuous Program is defined as being 3 dB greater than the Rated Power.

Sensitivity is calculated using Thiele and Small parameters; for SPL average in-box, refer to the frequency response.

Thiele and Small parameters are measured with a laser system following a preconditioning test.

Xmax is measured in relation to a THD of 10%; Xvar value corresponds to a decay of the Force Factor, Compliance, or both, equal to 50% of the small signal value.

Due to ongoing product improvements, features and designs are subject to change without notice.