Palmer Speaker Simulator with Loadbox 16 ohms (PDI03L16)

Speaker Simulator with Loadbox 16 Ohms

The Palmer Speaker Simulator PDi 03 - available in 2, 4, 8, and 16 Ohm

The PDI03 Palmer speaker simulator combines load impedance, a signal splitter, and a DI box especially designed for guitars. All functions are optimized for live and recording applications.

Instead of being connected to a loudspeaker, the PDI03 is connected directly to the amplifier output. The signal is no longer picked up by a microphone, but after passing through a special filter section is fed directly into a mixing console, tape recorder, etc. This permits power amplifiers to be operated to saturation without troublesome volume problems.

Two switches select between the 9 filters presets simulating various types of speakers and enclosures. Open back 2 x 12'' combo or 4 x 12'' cabinet characteristics and the punch of a full-out stack with a graphic EQ ''V'' setting can be selected as well as ''American'' or ''British'' speakers and ultra brightness.

Four paralleled unfiltered outputs are available for further processing. Both filter and line-out levels are adjustable.

For live monitoring, speakers may be connected while the reactive load is automatically switched off. Power handling capacity is 100W RMS without speakers.

• Type: passive
• Channels: 1
• Input type: unbalanced
• Inputs: 1
• Input connectors: 6.3 mm Jack
• Output type: unbalanced, balanced
• Outputs: 2
• Output connectors: XLR, 6.3 mm Jack
• Output impedance: 600 (XLR), 10 k (6.3 mm Jack) Ohm(s)
• Controls: voicing, line out, filter volume
• Dummy load: yes
• Dummy load impedance: 16 Ohm(s)
• Max. load: 100 W
• Voicing filter: yes
• Power attenuator: no
• Transformer isolated outputs: yes
• Cabinet material: sheet steel/aluminum
• Cabinet surface: powder coated/anodized
• Width: 480 mm
• Width: 19"
• Depth: 180 mm
• Height: 44.5 mm
• Height: 1 U
• Weight: 3 kg