KMA Machines Tyler Frequency Splitter
TYLER - The Frequency Splitter is an active and variable two channel crossover/signalsplitter. It divides your signal in a HIGH PASS and a LOW PASS path. Both filter having a 12db/Oct. roll-off with a variable cut-off frequency from 20Hz to 3kHz. Each channel has its own footswitchable buffered FX-Loop to process your lows (WOOD) or your highs (STEEL) with independent effect-chains in parallel. The MIX knob controls the ratio of the low- and high-pass signal. The range goes from 100% LP over to a 50/50 ratio until 100% HP fully clockwise. The mix control has a flat response with equally choosen cut-off frequencies for the LP and HP to avoid notches or bumps. The LEVEL control can boost your mixed signal up to 14dB, if needed. We added internal trimpots to control the impedance for the general input and each effect-loop, which is pretty handy when you want to insert your favorite fuzz pedal and a phase inverter to avoid any phase cancellation issues with external pedals inserted.