Part No. D100L-SWP10: (10 pre-treated swabs)
100% Liquid, No solvents

Applicator: Pre-treated foam swabs, 1/4 x 3/4 x 4-1/2″, provide a non-abrasive wiping action and apply 100% DeoxIT®. 
Formulation:   100% DeoxIT®.
Use: When the contact and connector are easily accessible. It provides wiping action—wiping with the grain is recommended. There is no flushing action. The applicator is a single-use, multi-application swab. Open, use on multiple connections, then discard the swab.
Notes: Use when overspray is an issue on materials. Formulation is safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discolouration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection.  Wipe off and reapply DeoxIT®.

More than a Contact Cleaner . . . Improves & Protects Connections!

DeoxIT® D-Series contact treatment is a fast-acting deoxidising solution that rejuvenates, lubricates, protects and improves conductivity on all metal connectors and contacts.

Use as a general treatment for connectors, contacts and other metal surfaces, and on non-critical metal surfaces with severe oxidation and corrosion. If the metal surface is discoloured, it is severe. DeoxIT® dissolves the contamination and protects the surface.