Mid-60s Valco-style dirty garage tremolo., A trem with driveability.

The Valcoder features ancrete analog L circuit inspired by 60s Valco tremolo. the depth and rate knobs set lower, the result is a smooth, bubbling modulation that is especially seductive when playing complex chords in the neck position.ank the DEPTH and RATE knobs for haunting pulses hard rhythmic chop that adds tension and attitude, particularly distorted passages.

The Valcoder a dynamic and responsive audio path (JF-based) adds a bit of vintage tube amp grit and slight compression to your sound. Increasing the INPUT pushes the front of the circuit harder, adding grit and a bit of compression. You can set the knob to adjust for unity or signal.

The Valcoder can also as a edge-of-breakup booster. With theTH knob all the way down, and INPUT and OUTPUT knobs turned all the up, you will get a warm gritty 10dB boost. This can used as an-on element to out your sound or can be used when you need it to help leads punch through the mixThe Val can be run 9 18 volts. 9 volts will allow for more and grit with a softer pick attack. volts will increase output level and will be slightly cleaner and less compressed with a more immediate pick attack Theolo effect be stronger and chier at 18 volts.