CAIG DeoxIT G100P Gold (Pen)

The G100P Gold pen is a unique conditioning solution that improves conductivity and provides long-lasting protection on gold, base metals and other precious metal contacts and connections (gold, silver, rhodium, copper, bronze, nickel, etc.). It is the only product that actually penetrates plated surfaces, molecularly bonding to the base metals to seal and protect both surfaces.

Recommended for critical applications where only slight cleaning action is necessary. If the surface looks dirty/oxidized, pre-clean with DeoxIT D-Series contact cleaner. DeoxIT® Gold is designed to dissolve small amounts of oxidation.
For reference, DeoxIT® Gold has approximately 0.5% cleaning action.

KEY FEATURES:

Improves Conductivity
Maintains Optimum Signal Quality
Prevents Fretting/Dendrite Corrosion
Reduces Intermittent Connections
Stabilizes Connections Between Similar & Dissimilar Metals
Reduces arcing, RFI and Wear & Abrasion
Temperature Range, -34 C (-29 F) to +240 C (464 F)

100% Liquid, No solvents, 6.0 mL

Applicator: Pen, provides NO flushing action, applies 100% DeoxIT® Gold.
Formulation: 100% DeoxIT® Gold.
Use: When contact and connector are easily accessible. No flushing action.
First Time Use: Depress tip on a surface for a minute or two until liquid flows. Pull out tip and reverse to speed up activating.
Notes: Use when over spray is an issue on materials. Formulation safe on plastics. Recommend wiping off excess, leaving a thin layer. After application, if you notice a green or black discoloration (sometimes over time), this indicates it is doing its job (dissolving oxidation) and improving the connection. Wipe off and re-apply DeoxIT®.