CAIG DeoxIT® Fader, F100S-L2

DeoxIT® Fader F-Series – Moving Contact Lubricant for Conductive Plastic Faders and Controls 

Part No. F100S-L2 Spray:
100% Spray, No solvents

Applicator: Spray, provides no flushing action, applies 100% DeoxIT® Fader using a metered one-shot valve
Formulation: 20% DeoxIT® Fader (active ingredient), 80% propellant.

Use: When solvents are not required or materials are sensitive to any solvents. No flushing action.  The spray provides the application of DeoxIT® on connectors and components that are not easily accessible.

Notes: Use when over spray is an issue and on sensitive materials. Formulation safe on plastics. On easily accessible surfaces, recommend wiping off excess, leaving a thin layer. Need more tactile feel, use the DeoxIT® Fader Grease after cleaning with DeoxIT® Fader F-Series.

Metal and/or Plastic: Not sure if faders have plastic and/or metal components, we recommend using DeoxIT D-Series, Part No. D100S-2 (100% DeoxIT spray).

KEY FEATURES:

• Formulated for Conductive Plastics/Controls 
• Maintains Optimum Signal Quality
• Replenishes Lubrication Lost
• Maintains Tactile Feel
• Reduces Wear & Abrasion
• Temperature Range, -26 C (-15 F) to +150 C (302 F)